Precautions for monitor use and daily maintenance

The monitor must have better image clarity, better color restoration and more stable characteristics, so as to better restore the monitoring reality and provide more powerful evidence for the subsequent evidence extraction. Then how to better ensure the normal use of LCD monitor?

Precautions for monitor use:

First of all, the monitor should avoid collision or friction with some hard objects. Because monitor product is more fragile, its resist "bump" ability also is very small, a lot of crystal and sensitive electrical element will be damaged when suffering bump, therefore should be careful not to let monitor have a chance to contact those easy to cause harm to it at ordinary times.

In addition, when cleaning the screen at ordinary times, also should pay attention to, do not spray the detergent directly on the screen, because these liquids are likely to flow into the screen caused by short circuit and affect the use. Instead, spray the detergent onto a soft cloth and then wipe the screen to avoid the danger.

Second, if you accidentally spray the detergent onto the screen, you don't have to worry too much about the liquid being injected into the screen. If it is found before the boot is only the screen surface fog, with a soft cloth gently wipe it, if the water has entered the LCD monitor, then put the LCD monitor in a slightly higher temperature place, such as the lamp, the inside of the water gradually evaporated.

Third, it's best not to use screen savers. Because the LCD monitor core structure is similar to "sandwich", it is between two pieces of glass substrate is filled with movement of the liquid crystal molecules, signal voltage directly control film crystal switch state, reuse transistor control liquid crystal molecules, liquid crystal molecules are clearly optical anisotropy, able to modulation from the backlight bulb light, realize the image display. A full display is made up of pixels, each like a transistor that can be switched on and off.

Finally tell you a little bit, if problems arise, the LCD monitor products don't secretly to remove the product, because the internal monitor will produce high voltage, people who do not know when removing the monitor not only has certain risk, also easy to monitor the failure, so when problems must be in time to find the manufacturer.

Monitor maintenance knowledge:

1, in the use of the monitor, avoid frequent startup and shutdown. Otherwise easy to make the LIQUID crystal lamp tube damaged, shorten the service life of the monitor.

2, do not place the monitor near the heat source or direct sunlight, so as not to accelerate aging.

3, avoid using plastic cover monitor. When used, the dust cover or shielding cloth should be fully opened to facilitate heat dissipation.

4, avoid the monitor is not used for a long time, especially in spring and summer, it is best to open several times a week, in order to avoid being affected with moisture and reduce the insulation performance of electronic components.

5, monitor avoid working with disease. If you find that the monitor image flickers, the brightness becomes bright and the white back sweep line appears, the machine produces ozone smell or internal ignition, abnormal sound, etc., you should immediately stop using, and timely maintenance.

6, the monitor is susceptible to magnetic interference, can not be used together with other electrical appliances monitor.

7, do not let the monitor in the standby state for a long time, should turn off the power.

8, the monitor is particularly easy to absorb dust, therefore, should be placed in a clean and well-ventilated environment.

9, do not put the monitor in a sealed cabinet, monitoring should pay attention to heat dissipation.

10, do not use hard objects scratch, impact display, because the liquid crystal display surface for polarizing film, if you use a pen or hard objects dot, it is easy to scratch polarizing film, affect the display effect.